Meet the needs for fast and efficient domestic hot water supply. They are designed for durability in areas with high level of water hardness. The hot water tanks are made of steel with special enameling and can be mounted horizontally, vertically, as well as on the floor.
Also available with heat exchanger for connection with auxiliary energy source.
AVAILABLE MODELS
| STANDARD | WITH HEAT EXCHANGER |
|---|---|
| 8lt | |
| 20lt | |
| 40lt | |
| 50lt | |
| 60lt | 60lt |
| 80lt | 80lt |
| 100lt | 100lt |
| 120lt | 120lt |
| 150lt | 150lt |
| 200lt | 200lt |
Connect the electric water heater with the central heating through the heat exchanger, to enjoy domestic hot water at a very low cost.
External housing electrostatically painted for protection against corrosion, with modern side plastic caps for guaranteed weatherability.
Thermal insulation of ecological high-density (40kg/m³) expanded polyurethane that ensures minimum heat loss, maintaining the hot water temperature. Insulation thermal conductivity: λ=0,021 W/m°C (DIN 56612, measured at 10°C) (DIN EN ISO 845, DIN 53 421, ISO 4590, DIN ISO 2796).
Thermometer which indicatively displays the temperature values.
Water tank seating base of double hanging brackets for easy and secure installation.
Mounting: vertical, horizontal or floor type.
Water storage tank of real nominal capacity, made of cold roled steel, specially designed for smooth developing pressure relief, with one only welding seam for perfect enamel application.
Double internal layer of enamel, baked at 860°C according to DIN 4753 for protection against electrolysis. The enameling is done in our own high tech industrial facilities. The water storage tanks are checked individually upon exit from the enameling unit, assuring the top quality of the enamel.
Cathode protection by magnesium anode for effective internal protection against corrosion and mineral deposits caused by electrolytic reactions.
Heating element that can be pulled away from the flange, rated according to the country of destination local regulations, with automatic, regulated thermostat.
Full bodied gasket for sealing the heating element from the thermal tank, thus protecting the heating element flange from electrolysis and corrosion.
All the electrical parts carry CE marking according to EN 60335-1 and EN60335-2-21 standards.
Protective cover for the electrical section, specially designed for easy access to the electrical parts, equipped with gland for the sealing of the passage of the heating element’s connection cable and operation indication light.
Heat exchanger with ¾ BSP female threaded pipe ends, made of stainless steel hose, with large exchange surface for use of the heating produced form the central heating.
Cold water inlet: supply equipped with safety and non return valve for the pressure relief and specially shaped divider for even water stratum.
Hot water outlet (consumption) of suitably adapted stainless steel pipe.
| Electric water heaters | Electric water heaters with heat exchanger | A | B | C | D | E |
|---|---|---|---|---|---|---|
| 8lt | - | 23 | 19 | 43 | 23 | 24 |
| 20lt | - | 25 | 26 | 51 | 32 | 33 |
| 40lt | - | 18 | 26 | 56 | 43 | 44 |
| 50lt | - | 18 | 26 | 61 | 43 | 44 |
| 60lt | 60lt | 27 | 26 | 69 | 43 | 44 |
| 80lt | 80lt | 43 | 26 | 84 | 43 | 44 |
| 100lt | 100lt | 58 | 26 | 99 | 43 | 44 |
| 120lt | 120lt | 73 | 26 | 119 | 43 | 44 |
| 150lt | 150lt | 105 | 26 | 145 | 43 | 44 |
| 200lt | 200lt | 76 | 26 | 133 | 52 | 54 |
Dimensions in cm
