COMPANY   |    NEWS   |   FAQs   |   CONTACT
English EN  |   Spanish ES  |   French FR  |   Italian IT  |   German DE

Collector Apollon Meander

The Apollon Meander collector, with meander type water frame and no welding points, achieves absolute tightness and increased efficiency in forced circulation systems thanks to the special nano coating treatment on the back of the absorber, which minimizes heat losses up to 35%.

Apollon Meander collector used in:

  • Forced circulation systems





Collector Apollon Meander

External one piece trough of naval aluminium alloy, rich in magnesium for protection against corrosion.
Robust construction - Perfect tightness - High aesthetics
High density eco-friendly thermal insulation achieved with a 60mm thick layer of prepressed rockwool with a covering of black glass fabric for the minimization of thermal losses. Rockwool insulation thermal conductivity: λ=0,035 W/(m°C).
(DIN 56612, measured at 0°C)
Headers are punched with upper expansion for perfect manifolds fitting, thus avoiding pressure drop in the collectors.
Selective complete area absorber made of selective aluminium sheet of high absorbency and low radiation that covers the complete window area as well as the headers, thus increasing the collector's absorbency. Laser welded to the water frame.
Low iron tempered solar glass, with a stable coefficient of expansion and high light transmittance; can withstand adverse weather conditions (e.g. hail storm, extreme temperature changes, etc.).
UV proofed EPDM solar glass rubber seal.
Aluminium profile (Al Mg Si 05) for solar glass seating and supporting, enhanced with special openings in order for the penetration of water into the collector to be avoided, thus achieving perfect tightness.
Special plastic parts for supporting and sealing the water frame to the trough, specially designed for the collector's ventilation, ith temperature sensor supporting option. Special silicone rubber seals allow fluctuation of the absorber's length (contraction - expansion) at all temperature (from -40 °C and up to +200 °C).
Four internal M8 threads integrated in the trough for simple and safe collector mounting on the support base.

Support base

Galvanized demountable support base, specially designed for simple mounting and inertia optimization.
Support base for installation on both flat and inclined surface for forced circulation systems.

Designed with the most modern calculation methods, according to which it is subject to natural and electronic inertia tests in extraordinary weather conditions.
COLLECTOR Apollon Meander 2000
TOTAL AREA (m²) 2.03
NUMBER OF MANIFOLDS 1
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
LIQUID CAPACITY (lt) 1.70
ABSORBER SURFACE (m²) 1.81
TOTAL DIMENSIONS LxWxH (mm) 2010x1010x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg) 32.3
ABSORBER SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT 95% ±2% / 5% ±2%
COLLECTOR Apollon Meander 2600
TOTAL AREA (m²) 2.53
NUMBER OF MANIFOLDS 1
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
LIQUID CAPACITY (lt) 1.82
ABSORBER SURFACE (m²) 2.30
TOTAL DIMENSIONS LxWxH (mm) 2010x1260x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg) 40.3
ABSORBER SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT 95% ±2% / 5% ±2%
TYPE Α B C D E F
Apollon 2000 106 101 201 186 11 35
Apollon 2600 132 127 201 186 11 66
Dimensions in cm
AVAILABLE MODELS
TYPE
Apollon Meander 2000 2.0
Apollon Meander 2600 2.6